MiG w packadging shorter

MiG’s are sold three to a set of 3pcs

Our new MiG component footers deliver vast improvements to all systems. Based on our Acoustic ART System resonators, MiG’s (Mechanical Interface Grounding) re-tune a component’s mechanical resonance to an even order harmonic, while providing a lightning fast drain of mechanical energy to ground. The result is a much larger soundstage with a lower noise floor for blacker backgrounds. Other benefits include sweeter highs with extended air, a more layered and relaxed mid-range, and deeper, tighter bass. MiG’s are especially beneficial when improving the performance of digital components such as transports, D to A converters, CD players, and even digital clocks. MiG’s are a must audition for anyone seeking organic natural sound.

MiG’s are versatile and can be placed in different ways to fine tune your systems performance:

mig-ambient-2

When two MiG’s are placed “round side up” and one MiG is placed “round side down” under a component, as illustrated in the above diagram, you hear a more ambient soundscape that is especially pleasing when room acoustics are somewhat “live” or undamped. You may also prefer this combination if you like a slightly more liquid presentation, or if you often listen to large orchestral works.

 

mig-pinpoint-2

When two MiG’s are placed “round side down” and one MiG is placed “round side up” under a component, as illustrated in this diagram, you hear an immediate pin-point presentation of images. This combination is especially pleasing in rooms that are very damped, or for people who prefer intimate recordings, such as small scale Jazz.

 

Follow These Guidelines When Placing MiG’s in Your System:

When placing MiG’s in a digital system (CD player or two-box digital front end) follow these guidelines: First place three MiG’s under your TRANSPORT or CD PLAYER in the Pin-Point Configuration. Next listen in the Ambient Configuration. You should immediately notice a preference. If your system has a multi-box digital front end (D to A converter and transport), place a second set of MiG’s under your D to A converter in the same configuration you chose for your transport. Now place a set of MiG’s under your pre-amplifier, first in the combination you preferred under your digital component(s). If this does not immediately improve your system, try the opposite placement configuration. Lastly, place MiG’s under your amplifier(s) in the Pin-Point Configuration. Now call your spouse into the room- enjoy!

When placing MiG’s in an analogue system follow these guidelines: First place MiG’s in the Pin-Point Configuration under your phono pre-amplifier, or pre-amplifier if you have an integrated phono/line level pre-amplifier. Next, reverse placement to the Ambient position. You should experience an immediate preference. Next, if your turntable has a separate power supply (one that is not connected to your turntable) place a set MiG’s in the configuration you preferred under your phono-pre / integrated pre-amplifier. Now place a set of MiG’s under your line level pre-amplifier again in your preferred placement configuration. If you do not hear the same level of improvement you have experienced thus far, try the reverse placement option. Lastly, place MiG’s under your power amplifier(s) in the Pin-Point Configuration. Now call your spouse into the room- enjoy!

mig-yes-it-does